Breakaway Swivels & Connectors
Wire Breakaway Connector Buy Now
The wire breakaway connector uses a wire instead of a pin to achieve the smallest of break loads. The two-piece design ensures you don’t lose parts of your connector when separation occurs and the product is manufactured from stainless steel to provide years of service.
For other uses and industries, visit this site.
Wire Breakaway Swivel Buy Now
This product is similar to our 00531 series Wire Breakaway Connector as it protects the utility being installed from overload with the addtion of a built-in swivel. These products are available in 3 different sizes, each with a different low capacity range.
For other uses and industries, visit this site.
Breakaway Connector Buy Now
These products are typically used during the installation of fiber optic cable or very small gas ducting where the connector can be preset to breakaway at a predetermined load, thus protecting the fibers or the duct. The breakaway pins may be changed to allow the same connector to be used with a variety of different pins. *Uses 00535 & 00555 pins.
For other uses and industries, visit this site.
Breakaway Swivel Buy Now
This product is similar to our 00530 Breakaway Connector as it protects the utility being installed from overload with the addition of a built-in swivel. The breakaway pins may be changed to allow the same swivel to be used with a variety of different pins. *Uses 00535 & 00555 pins.
For other uses and industries, visit this site.
Heavy Duty Breakaway Connector
These products are designed to protect polyethylene ducting from overload during installation by directional drilling and are used between the pullback swivel and the duct puller. The connectors are a three part product, held together by a group of pins. The pins are designed to break in tension at a specific load.
*Uses 00565 pins. See pin configurations here. For other uses and industries, visit this site.
HDD Breakaway Swivel
The HDD Breakaway Swivel is similar to our 00550 Series and yet designed around our 00503-208 DUB-Lite Swivel. It is only 1-1/2" longer than the 00503-208 Dub-Lite Swivel, but still 5" shorter than the alternative of using the Dub-Lite and a Breakaway Connector together.
*Uses 00565 pins. See pin configurations here. For other uses and industries, visit this site.
Mega Duty Breakaway Connector
As the name suggests, this breakaway connector takes heavy-duty to a new level. This product is intended as mechanical overload protection for use when installing cable, ducting, or pipe. It uses a new, larger set of breakaway pins (00575 Series) and has a total of 17 pin locations, allowing for a break load range from 4,700 lb to 79,900 lb.
Magnetic Breakaway Connector
This new connector is intended as mechanical overload protection for use in low force applications where accuracy and repeatability are required. Suitable for long term use, this product is made for situations when fatigue of traditional mechanical fuses needs to be eliminated, and easy, quick, inexpensive reset of the connector is required. Used in conjunction with 00537 Series breakaway magnet kits.
Breakaway Pins & Wires Buy Now
Breakaway Pins and Wires are sold in kits that cover a wide range of breakloads to suit your various needs. Different sizes and styles of pins fit different Breakaway Connectors.
For other uses and industries, visit this site.
